DNS Server Installation Step by Step

Now install the Dynamic Domain Name System (DDNS) step by step
Here’s how to do it.

Start>Control panel>Add Remove Programs

This will open the Add or Remove Program. Go to Add / Remove Windows Components
The Windows Components Wizard box will appear…

Select the Networking Service Detail button in the Windows Components Wizard
and Click.
Clicking the Detail button will bring up the Networking Service Components.
Out of that
Check the Domain Name System (DNS) check box

When done, just click OK. Check Box on Networking Service is complete
You will see.
Click Next.

The Configuration Components page appears. Copy Windows Component Files
Will copy
You will be asked for a Windows Server 2003 CD Disk. Please enter

Once you have installed the Windows Components, click the Finish button.

Now look at the Domain Components DNS component in Windows Components
Installation once done, log in to the DNS Console. Click Start> Administrative Tools> DNS.
If so
The DNS Console will open.

There are two zones in the DNS Console: Forward Lookup Zone and Reverse Lookup Zone
You will see New in both Forward Lookup Zone and Reverse Lookup Zone
You have to create zones. So New in Forward Lookup Zone
Right Click on New Forward Lookup Zone and select New Zone to start creating zones.

Welcome to the New Zone Wizard will appear. Click Next.

The Zone Type Page will appear. Select the Primary Zone and click Next.

The Zone Name Page will appear. Enter the Zone Name as yourzonename.com and click Next.

The Dynamic Update Page will appear. Allow Both nonsecure and secure Dynamic Updates
Choose
Then click Next

The Completing the New Zone Wizard will appear. Click Finish.

Now that the Forward Lookup Zone has been created, the zone is called yourzonename.com
You should see a name.

Next, we will create a Reverse Lookup Zone. So right click on the Reverse Lookup Zone and select New Zone

The Welcome to the New Lookup Zone Wizard page will appear. Click Next.

The Zone Type Page will appear. Select Primary Zone. Then click Next.

The Reverse Lookup Zone Name Page will appear. In the Network ID, enter the IP Address of the DNS Server Computer 3 Octet.

The Zone File Page will appear. Just click Next.

The Dynamic Update Page will appear. Select Allow both nonsecure and secure dynamic updates, and then click Next.

The Completing the New Zone Wizard will appear. Click Finish

Now that you have created the Reverse Lookup Zone, you should see the Reverse Lookup Zone.

Now that the Forward Lookup Zone and Reverse Lookup Zone have been set up, you need to create a record file to map the IP Address and DNS Name.
Create a Host A Record File in the Forward Lookup Zone. Reverse Lookup Zone
Create a Pointer (PTR) Record File in To create a Host A Record File, right click> Forward Lookup Zone Name on yournamezone.com> New Host
Click (A)

A New Host Box will appear. Enter your Computer Name in the Name field. In the IP Address
Enter your IP Address. Then click the Add Host Button.

Click the Add Host Button and a DNS box will appear. The Host Record will be displayed.
So click OK

You should see a Host A Record file as shown in the image.
This Host A Record File is a mapping of Name and IP Address.

Create a Pointer (PTR) Record File in the Reverse Lookup Zone. Right-click the Reverse Lookup Zone under 192.168.10.X Subnet and select New Pointer (PTR).

A New Resource Record Box will appear. Enter the DNS IP Address in the Host IP Number in the box.
Then enter the FQDN Name from the Host A File in the Forward Lookup Zone in the Host Name field. Then click OK.

You should see a Pointer (PTR) Record File as shown below.

Now we have a big DNS server. Dynamic updates are also enabled.
So let’s move on to how to dynamically update Host (A) and Pointer PTR Resource Record files from client computers to a large DNS server.
The command to use a client to dynamically update the host (A) and Pointer PTR Resource Record file from a large DNS server is to perform a dynamic update with the ipconfig / registerdns command. In order to receive dynamic updates from such a large Dynamic DNS server, your client computer must have a full DNS name. Therefore, in order to have the full DNS Name of your computer

Right Click on My Computer> Properties. Then go to the Computer Name Tab.
Click the Change Button in the Computer Name tab.
Then click the More Button again. There you will find a DNS entry field for the Computer Name, Primary DNS Suffix of this Computer.
Type yourzonename.com there. Then OK
Click OK
Keep clicking You need to restart your computer. Restart. Restarted
Once the computer has booted Windows, type ipconfig / registerdns from the Command Prompt. If so, Host DNS and Pointer PTR of Client Computer from your DNS Server
The Resource Record File will be dynamically updated.

Now I’m done with my step by step DNS installation.
So let me stop here….

Ref::youth college

if you have any concerns please feel free to contact me.

Leave a Reply

Your email address will not be published.